Sinco Customs Rb26/30 T3 Twin Scroll - Turbo Manifold

After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have found the perfect balance of boost control and flow. With minimal back pressure where the manifold meets the turbo, you can be sure that you're getting the best flow possible from your turbo manifold. FLOW = POWER.

Fitment R32-R33-R34-Laurel-Cefiro-Stagea-S Chassis

NOTE: Will fit with abs with up to 50mm wastegate, if you are not running abs then any gate size will fit. The RB30 needs bigger wastegates because of the higher gas speed, we recommend using at least a 50mm wastegate with the twin scroll manifold, depending on the rear housing size the 60mm is a better option but this can only be used with non abs 

NOTE: The only difference between the RB26/30 and the RB26 manifold is the height, The rb26/30 manifold sits 24mm lower

• Minimum 50mm Vband wastegate
• Features dual 3 into 1 merge collectors
• 12mm lazer cut flanges

5 year no crack warranty

10 year no crack warranty if fitted by us in store

Manifold Manufacture Times

Our manifolds are made to order, because of this the time frames for each manifold material type & finish are listed below.

- STEAMTUBE-MATT BLACK = 5-6 WEEKS FROM DATE OF ORDER